The MCP is the surface panel, required to power, control and monitor the Downhole Tractor (MDT) or Downhole Electric Cutting Tool (DECT) via an integrated modem, dc power supply, and an external PC.
Description
The control panel runs off mains power and controls the functions and power supply to operate the Tractor or DECT. The MCP is connected to the winch collector and logging cable. The surface panel has four controls – mains on/off switch, voltage control dial, function switch and safety interlock switch. In combination with a laptop computer, and the tool specific software, the logging engineer has full control of a Tractor or DECT.
The voltage control dial adjusts the supply voltage for setting the tractor tool clutch, drive arm opening and speed control during tractor operation. It is used for setting the anchor arms and speed control during DECT operation. Power can only be applied by this control if the spring biased interlock switch has also been operated. The function switch allows the tractor's passenger tools to be connected to their panels for logging. During tractor and DECT operations, all parameters can be monitored and recorded via the laptop. Almost any PC can be used; a notebook model is ideal. During operations a single display is provided. This provides control over Tractor functions and a full monitoring of its status during tractoring.
Features
- Automatically selected mains input to 110 or 240VAC.
- Positive and Negative passenger tool voltage supported.
- Monitors and controls tool operation.
- Contains a modem for communication with the tool.
- Uses data logging PC to communicate with the tool via the MCP modem.
- Bi-directional serial link for connection and communication between the PC and MCP.
- Helicopter transportable.
