Sondex WIPER Readme =================== Sondex Well Integrity Processing, Evaluation and Reporting (WIPER) Software reads Sondex Magnetic Thickness Tool (MTT) and Multifinger Caliper Imaging Tool (MIT) data from a Warrior database and performs all the processing required to generate a report on the state of the well casing or tubing. WIPER requires a Sondex Hardlock key (dongle), enabled for WIPER, to use all features of the software. If a valid key is not present then the software will be prevented from analysing data and producing a report but other functionality, like collar location and MTT calibration, will still be available. To install WIPER, run the Setup program. Note: The Hardlock drivers must be installed separately (available on the Sondex website) if not already installed on the machine. The program is compatible with Windows 2000 and XP. Warrior V7 or later must be used. Customer Support Email: support@sondex.com Release History =============== v2.4.6.0 07/04/2009 ===================================== Bug Fix - Fixed issue with analysis failing in partially available joints Bug Fix - Fixed issue with incorrect centralisation interpolation on rescaled data Bug Fix - Added a check to see if wellobject already exists in the database Bug Fix - Corrected 9.625in pipe OD in Bin\PipeTypes.dat v2.4.5.0 23/03/2009 ===================================== Bug Fix - Fixed issue with matching joints not responding to user settings v2.4.4.0 12/03/2009 ===================================== Report - New options to specify n worst defects on extended title page(s) Well Tally - New button to remove all jewellery items and set back to normal Analysis - Tool rotation correction applied to damage maps only Bug Fix - Fixed a number of issues with the docking windows Bug Fix - Fixed issue with MTT shadow removal causing file read errors Bug Fix - Results editor outputs in the correct units Bug Fix - Defect spreadsheet outputs in the correct units Bug Fix - Fixed issue with an open database handle in the MTT calibration v2.4.3.0 20/11/2008 ========================= Bug Fix - Corrected an error in the interpolation part of the centralisation algorithm Report - Limited the front page overview to a max of 20 holes v2.4.2.0 10/11/2008 ========================= Annotation - Window automatically picks up default PRS file name and added open file dialog Report - Depth of worst projections are shown on report and written to analysis file Report - Perforation table lists perfs by joint in reported depth range to 2 decimal places Report Settings - Cross sections of worst projections can be shown in report Report Settings - New tab to set field, well names etc to long names WIVA Export - Improved to export defects given in analysis overview of report Analysis Options - Small/noise defect options removed because they are not implemented Tally and Results Editors - Windows are now resizable Presentation Files - Improved MIT formats and set up scales for imperial units Standardised field well run names to a maximum of 14 characters and company country analyst to 40 Bug Fix - In the calculation of % change error that appears on the the results editor Buf Fix - To smooth automatic scaling of the trace in areas where the finger traces are similar Bug Fix - Where metric perforation depths were not being output to report correctly Buf Fix - Where the MITGRAD and COMBGRAD curves were not being written correctly Bug Fix - So that the MIT twice radial flag is written and read correctly Bug Fix - Where the vertical zoom scroll was getting out of sync with the main trace Bug Fix - So that exported defects for WIVA display in the correct depth and tool units Bug Fix - So that collar Type X is implemented when selected as the collar type Bug Fix - Where database handle was not being closed after calculation of nominal ID Bug Fix - Where database handles were not being closed after intial processing Bug Fix - Where original database pass was being overwritten Bug Fix - Where an error was being thrown when attempting to read data outside a curves depth range Bug Fix - Corrections in centralisation and decentralisation algorithms Bug Fix - So that the CENTSTAT curve is updated correctly in the processed database Bug Fix - Where the top stripe wasn't being read Bug Fix - So that the ignored area can extend to the top stripe Bug Fix - So that the presentation file uses the depth scale from Warrior.ini Bug Fix - So that the analysis unit settings are set to the Warrior settings Bug Fix - So that long and short joints are evaluated on 20% of the estimated length Bug Fix - That fixes a crash when changing the pass name in analysis options Bug Fix - So that collar search defaults to Type 1 Bug Fix - So that count of deeply penetrated list on report is equal to count of joints with possible hole Upgraded to Syncfusion 6.402.0.15 targeted for .NET Framework 2.0 V2.4.1.0 15/05/2008 ========================= Type X MIT collar search; allows almost any collar to be quickly located Improved MIT collar auto-alignment maths Updated auto-zoom to keep tool data easily visible on screen Jewellery setup is easier and faster; now edited within the pipe tally-sheet New Jewellery types dialog allows for easier editing and has more advanced options MTT data is automatically rejected if the sampling rate is not supported User preferences can be restored autamatically when a new version is installed Cross-section displays show the position of 'Sensor 1' Very short DB's now load and display correctly Zone search now finds zonses where joint length changes Joint analysis can now run on multiple processors Color schemes improved when in Windows 'Classic' mode Added support for Spanish language reports Text in the 'glossary' pages of the report is now aligned correctly Fixed bug where 'Ignore Areas' are calculated incorrectly Fixed bug where % change curves are not reset to 0 when within a make-up area Fixed bug where results editor cannot save changes if the number of possble holes is edited Fixed bug where empty results pages are created in the report if only one tool is running Fixed bug where XLS detailed damage reports become corrupt if joints are re-analysed Fixed bug where presentation info can be written to the new DB with incorrect depth units V2.3.1.0 09/04/2008 ========================= A Perforation report page can be added to the final report V2.3.0.0 26/03/2008 ========================= Report descriptions have more detail More settings are saved to file in order to reduce user effort Various bug-fixes affecting general usability V2.2.0.0 17/03/2008 ========================= Updated Russian translations Final report is much more customisable V2.1.6.0 25/02/2008 ========================= Updated Russian translation text New report layout options A user specified over page can be added to the final report Various minor fixes V2.1.4.0 01/02/2008 ========================= Options added to select the type of initial processing to use and to skip centralisation Grade column can be removed from report tables Fixed several metric/imperial bugs Fixed bug where centralisation fails when some important curves are not present Fixed several minor GUI bugs V2.1.2.0 21/01/2008 ========================= Jewellery search feature now identifies if the joint can be analysed* A WIVA features file can be generated containing all 'possibles holes' found during analysis Speed of the initial processing task has been greatly increased Minor bug fixes * Automatic functions require good quality data, otherwise user intervention will be required. Some functions also require data from a specific tool to be available (MTT and/or MIT) V2.0.2.0 13/12/2007 ========================= Automatic language switching (based on culture settings) Full Russian language support (Includes GUI, Report and help file) Speed of MIT collar search greatly increased MTT collar search speed increased Intelligent processing* can perform various tasks in the background while the user is working Fully automatic MTT calibration* Jewellery items added by the user are available for future analyses Bad areas of the log can be ignored during joint analysis Tally sheet data can be automatically filled* based on estimates of the pipe parameters Improved collar alignment on logs that contain noisy data MTT search mask can be picked automatically* Various minor bug fixes * Automatic functions require good quality data, otherwise user intervention will be required. Some functions also require data from a specific tool to be available (MTT and/or MIT) V1.4.0.0 6 November 2007 ========================= Various updates and bug-fixes Improved MIT collar alignment for short collars V1.3.1.0 11 October 2007 ========================= Ignore areas allow external MTT collars etc to be ignored during processing. Results can be edited before creating the report. Fixed various problems that could cause crashes. V1.2.7.0 Internal Release ========================== Recursive MTT collar search, greatly improves detection rates. Search for jewellery joints. Windows can be re-arranged with a single click. Improved maths used during analysis. Increased speed when using tally sheet search functions. All MIT coupling regions can be resized at the same time. Added report setting to avoid reporting on MIT coupling items. Option added so MTT shadows automatically re-process when moved. V1.2.5.0 Internal Release ========================== Several bug fixes. Jewellery item descriptions saved within the analysis. Zones can be automatically located when filling the tally sheet. Rotation correction increases accuracy of damage descriptions. V1.2.4.0 Internal Release ========================== Minor bug fixes. Damage 'grade' calculated for each joint. New maths options for analysis. Upgraded IPlot presentations added. V1.2.3.0 Internal Release ========================== Analysis files can be automatically copied to a new location. Added dialog to display and edit analysis information. MTT calibration passes can be picked from any database. Minor bug fixes. V1.2.0.0 18 May 2007 ===================== First commercial release. V1.1.0.0 4 April 2007 ====================== Beta release. V1.0.0.0 20 November 2006 ========================== First internal release.