*********************************************
This file contains driver version information
*********************************************

Part Number:
2510-0003 Win95/98 Driver Distribution Disk

Driver Versions:
Printrex 810 	 -  3.43 / 2.1.0
Printrex 820G	 -  3.43 / 2.4.0
Printrex 820DL/G -  3.43 / 2.4.1
Printrex 840DL/G -  3.43 / 2.4.3

Printrex 820	 -  3.6
Printrex 820FF	 -  3.6
Printrex 820DL	 -  3.8
Printrex 840DL	 -  3.8
Printrex 1200DL  -  3.5

Printrex 420/422 -  3.7
Printrex K100	 -  3.4
Printrex K100 (scaled) - 3.6
Printrex IK60	 -  3.5
__________________________________________________



Changes for Release 38: 
		
	- Added support for Model 820 with firmware predating V11.
     	- Corrected R36 INF file error.

------------- Revision History:  -----------------------------

Release 37: Internal use.

Release 36: 
		
	- New support for Models 810, 820G, 820DL/G.
	- Improved 840DL/G driver, with both grayscale and bimodal
	  color depth in one model.  Simplified user interface.
	- All four above models have context-sensitive help for the
          Printer Settings property page, plus a full help file.
	- All four above models have driver support for a variety of
          film and paper media, plus support for nearly any pre-printed
          form-location markers.
     	- Improved 820DL and 840DL UI, with added FormFeed options	
          and clarified page control.
	- 1200DL control code sequence cleaned up, eliminating mid-job codes.
     	- New support for 60mm K60 model added.
	- K100 Scaled 1:1.5 and Scaled 1:2 models added.

Release 35 - 20: Internal Use.

Release 19: Added support for model 840DLG, Bimodal only (non-grayscale).
	        Initial 840DLG driver release as V 3.10.
	    Updated 820 driver, deleting support for Model 822.
	    Added support for model 422, back-compatible to model 420.
   		 - Both full-scale and half- scale models available.
		 - For tear-off convenience, models with end-of-job
		   feeds of 0mm, 16mm and 25mm are provided.
	    Updated 840DL driver to V 3.3, removing control codes from ENDPAGE.
	    Updated 820DL driver to V 3.5, removing control codes from ENDPAGE.

Release 18 - Release 13: Internal Use.

Release 12: 820DL rev to 3.4:
	    Changed Doc-End code: enable FF at end of job, then FF.

Release 11: Changed INF file for NT4.0 compatibility.
	    Added Readme.txt for driver installation on NT4 print server.
	    Added EXWIN95.BAT and EXWIN98.BAT for extracting system files 
		from CD to this driver disk.
	    No driver changes.	

Release 10: Corrects distribution zip file error (absolute, not relative file paths used).
	    No driver changes.

Release 9 - Change to disk: debugger versions not displayed in install dialog.
	    Changes to drivers:
		1. PRX820DL: User- defined page size added; new version 3.3
		2. PRX840DL: User- defined page size added; new version 3.2
		3. PRX1200DL: 	a)User- defined page size added
				b)All speeds in one model
				c)Media and sensitivity adjust separated
				d)new version 3.4

Release 8 - PRX840DL V3.1 added to distribution disk: New model.

Release 7 - (Internal Use)

Release 6 - Improved support for GDI Blt operations, all drivers.

Release 5 - (Internal Use)

Release 4 - PRXK100 V3.3 added to distribution disk

Release 3 - PRX420 V3.2 added to distribution disk

Release 2 - PRX820 V3.1 added to distribution disk

Release 1 - Initial release with PRX820DL V3.1 & PRX1200DL V3.2 Drivers